OXILAM 2X 3157 4157 LED Strobe Flashing Blinking Brake/Tail Light,Blinker,Alert Please check your car manual or original bulb to confirm the bulb size, length is correct or not before purchasing to save your time. This item is pair of OXILAM Brand extremely super bright 3157 3156 3057 high power 1 PCS 1445SMD + 15PCS 3014SMD led bulbs, especially designed for replacing the front and rear turn signal lights,backup reverse light and brake tail light. This bulb is equipped with high quality 28 pieces led chips and luxury design that will make your cars looks much brighter than halogen or stock lamp,highly recommended.
This bulbs is compatible with CK/SRCK and standard socket type, no worry about the burn out the fuse. Feautures:
Using high power 1 PCS 1445SMD + 15PCS 3014SMD LED chips, just 28 chips per bulb to produce peak brightness output, and less heat compared to other bulbs that sometimes use up to 30 chips,360 degree illumination with no blind spot and shadow Make a big difference for your vehicle! Excellent Heat Dissipation Construction OXILAM bulbs use built of lightweight and high-strength aluminum alloy as bulb body to keep themselves cool, even if they're used in constant-on applications like daytime running lights, they still illuminate non-fading brightness. Some bulbs, which were covered in many LED chips will haven't enough cooling surfaces.
You needn't worry whether you have a CK or Non-CK socket, these bulbs are universally compatible. They will fit into the same socket as your OEM original bulbs,No electromagnetic interference,No need to consider polarity while installing, 1 inch design makes sizing comparable to halogen bulbs, fit perfectly in your vehicle. Truly plug & play
A constant current driver is a device that takes any incoming voltage and smooths it out, regulates it, so a steady stream of voltage/current reaches the LED, ensures a bright, efficient and long-lasting illumination,and prevent the bulb from burning out when the voltage is unstable.
Condition: 100% Brand New LED Chips: 24 PCS 3014SMD + 4 PCS 3030SMD Lumen: 2400LM/per bulb,Total 4800LM. Color Temperature: 6000K red lifespan: over 50,000 hours waterproof rated : IP67 Wattage:4.3w/pcs,8.6/set Bulb size:3157 3156 T20 3057A 3357NA 3456 3056 4156 3047 3057 3155 3357 3454 3457 4057 4157...(For Reference Only) Flash: Flash 3 times in 2 seconds for brake light mode, then keep steady lighting on. Installation positions: Brake Light Bulb Tail Light Bulb Warranty: Full ONE Year guaranteed for manufacturer quality. CANBUS ERROR FREE: No. For some vehicles, it may require install decoder or load resistor to avoid turn signal hyper flash or fast blinking. Cross Reference: 3156 3056 3156A 3456 4156 3157 3157A 3047 3057 3357 3457 3457A 3757 4057 4111 4157,4157NA,3157LL,etc. Application: turn signal light,back up reverse light, brake tail light, etc. Voltage: 12V~24V, bulit in IC driver,much stable current than normal led bulbs in the marker, longer life span.
2x LED Light Bulbs Note: The compatible vehicle list shows only partial cars due to the Pricetronic limits, if your car plug is same with this bulb, the item will fit your car. If you're not sure about it, please send us an Pricetronic message and tell us your car year, make, model and the position you need to replace, we will help you check with it. If you have a decoding problem or any other problems, please contact us first, we will help you with it. I'm a new seller, thanks a lot for your trust and convince! We will serve you with all my heart.
Brand OXILAM Manufacturer Part Number B3X-3157-R2-FLASH-OXILAM Bulb Size 3156/3157/4157/4057 Warranty 2 Year Type LED Brake/Tail Light Bulb Color RED To Fit Turn Signal/Sidemarker/Brake/Tail Light Placement on Vehicle Front, Rear, Left, Right OE Spec or Performance/Custom OE Spec Other Part Number 3157NALLB2 3157LL 3157LLB2 3356 3357 3357K Voltage 9-16V Interchange Part Number 3156/3157/4157/4057 Available Sizes 7443/7440/1157/3157/3156/BAU15S/168/192/T10/921/T15/31MM/DE3175 Bulb Type LED Brake/Tail Light Lighting Type Strobe Flashing Blinking Red LED Brake/Tail Light Bulb Fitment Code 3156 3157 4157 4057 Beam Type Turn Signal/Sidemarker/Brake/Tail Light It also fits many other cars As long as your bulb size is the same with this Bulb Life Hours Up to 30,000 Hours Features Ballast Included, CANbus Compatible Fitment Type Direct Replacement Suitable For Brake Light, Tail Light Waterproof Rating IP67 Waterproof Installation positions Turn Signal Light Bulb/ Brake Light /Tail / 3rd Brake Light Bulb Wattage 7W/bulb ,14w/set UPC 782890728829 MPN OXILAMB3X3157 LED Type 1pcs 1445smd,15pcs 3014smd
Payment We only accept PayPal payment, should be received within 3 days from the date of purchase. Please keep the consistency of Paypal address and Pricetronic address. Payment should be made within 4 days once you won a item ,or Pricetronic will launch Unpaid Reminder agaist you and there will be bad record on your Pricetronic account . Buyers are responsible for import duties, custom fees and taxes.Please check with your country's custom office to determine the additional costs before you finally make the purchase
Shipping All items will be shipped in 48 hours after receiving your payment.
We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver.
Returns We offer 30 days return policy. Please contact us within 30 days t from the date you receive your order if you have any issues with the product or want return .Refund will be send after we got your resend package. All returned items should be in the original packaging, return tracking information should be provided .. Buyer is responsible for return shipping cost due to the problem not caused by item quality itself.
Contact Us Our office hours are MONDAY-FRIDAY 9:00PM-6:00PM PST, but we will response you once we get your message .There will be some delay on response if you send message or E-Mail on weekend.
FAQ FAQ Q1: Will this bulb fit my vehicle? A: We can match almost any vehicle to one of our bulb sizes. Pricetronic only lets us include partial vehicle fitments per listing, but if your vehicle does not show up on the compatibility table at the top of our listings, welcome you to contact us for free consulation before purchasing a product. Q2: My item has not arrived, what's taking so long? A: Sometimes items take longer than expected, especially if it's going far or to rural area. Check with your post office to see if your item has been held up. Sometimes USPS will not update a tracking number until it has arrived at its destination. If your item still has not arrived after a few days, let us know so we can double check for you and help solve it asap. Q3: Do I need to mention the Year, Make and Model in the notes when place order? A: YES. Please include the Year, Make, and Model in the notes section during checkout to ensure you receive everything needed for your kit! Q4: My bulbs won't fit, help! A: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know. The bulb size may be wrong, double check the item you received with the item you ordered. Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications. Q5: Neither side lighting up? Both sides flicker, flash, or work inconsistantly. A:Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor. Q6: WARNING ABOUT POLARITY Unlike halogen bulbs, LEDs are polarity sensitive. BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket. -if your light turns on, please proceed to install both bulbs onto your vehicle. -if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle. Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Shop Category
Hot Item USD 14.60 USD 42.08 USD 12.49 USD 17.95 USD 23.74
New List Item USD 61.55 USD 62.69 USD 68.19 USD 61.55 USD 68.19
OXILAM 2X 3157 4157 LED Strobe Flashing Blinking Brake/Tail Light,Blinker,Alert Please check your car manual or original bulb to confirm the bulb size, length is correct or not before purchasing to save your time. This item is pair of OXILAM Brand extremely super bright 3157 3156 3057 high power 1 PCS 1445SMD + 15PCS 3014SMD led bulbs, especially designed for replacing the front and rear turn signal lights,backup reverse light and brake tail light. This bulb is equipped with high quality 28 pieces led chips and luxury design that will make your cars looks much brighter than halogen or stock lamp,highly recommended.
Most important Note: This bulbs is compatible with CK/SRCK and standard socket type, no worry about the burn out the fuse. Feautures:
A Higher Level of Visibility Using high power 1 PCS 1445SMD + 15PCS 3014SMD LED chips, just 28 chips per bulb to produce peak brightness output, and less heat compared to other bulbs that sometimes use up to 30 chips,360 degree illumination with no blind spot and shadow Make a big difference for your vehicle! Excellent Heat Dissipation Construction OXILAM bulbs use built of lightweight and high-strength aluminum alloy as bulb body to keep themselves cool, even if they're used in constant-on applications like daytime running lights, they still illuminate non-fading brightness. Some bulbs, which were covered in many LED chips will haven't enough cooling surfaces.
Non-Polarity Design + - You needn't worry whether you have a CK or Non-CK socket, these bulbs are universally compatible. They will fit into the same socket as your OEM original bulbs,No electromagnetic interference,No need to consider polarity while installing, 1 inch design makes sizing comparable to halogen bulbs, fit perfectly in your vehicle. Truly plug & play
Built-in Constant Current IC Driver A constant current driver is a device that takes any incoming voltage and smooths it out, regulates it, so a steady stream of voltage/current reaches the LED, ensures a bright, efficient and long-lasting illumination,and prevent the bulb from burning out when the voltage is unstable.
Specification Condition: 100% Brand New LED Chips: 24 PCS 3014SMD + 4 PCS 3030SMD Lumen: 2400LM/per bulb,Total 4800LM. Color Temperature: 6000K red lifespan: over 50,000 hours waterproof rated : IP67 Wattage:4.3w/pcs,8.6/set Bulb size:3157 3156 T20 3057A 3357NA 3456 3056 4156 3047 3057 3155 3357 3454 3457 4057 4157...(For Reference Only) Flash: Flash 3 times in 2 seconds for brake light mode, then keep steady lighting on. Installation positions: Brake Light Bulb Tail Light Bulb Warranty: Full ONE Year guaranteed for manufacturer quality. CANBUS ERROR FREE: No. For some vehicles, it may require install decoder or load resistor to avoid turn signal hyper flash or fast blinking. Cross Reference: 3156 3056 3156A 3456 4156 3157 3157A 3047 3057 3357 3457 3457A 3757 4057 4111 4157,4157NA,3157LL,etc. Application: turn signal light,back up reverse light, brake tail light, etc. Voltage: 12V~24V, bulit in IC driver,much stable current than normal led bulbs in the marker, longer life span.
Package include: 2x LED Light Bulbs Note: The compatible vehicle list shows only partial cars due to the Pricetronic limits, if your car plug is same with this bulb, the item will fit your car. If you're not sure about it, please send us an Pricetronic message and tell us your car year, make, model and the position you need to replace, we will help you check with it. If you have a decoding problem or any other problems, please contact us first, we will help you with it. I'm a new seller, thanks a lot for your trust and convince! We will serve you with all my heart. Payment Shipping Returns Contact Us FAQ We only accept PayPal payment, should be received within 3 days from the date of purchase. Please keep the consistency of Paypal address and Pricetronic address. Payment should be made within 4 days once you won a item ,or Pricetronic will launch Unpaid Reminder agaist you and there will be bad record on your Pricetronic account . Buyers are responsible for import duties, custom fees and taxes.Please check with your country's custom office to determine the additional costs before you finally make the purchase All items will be shipped in 48 hours after receiving your payment.
We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver. We offer 30 days return policy. Please contact us within 30 days t from the date you receive your order if you have any issues with the product or want return .Refund will be send after we got your resend package. All returned items should be in the original packaging, return tracking information should be provided .. Buyer is responsible for return shipping cost due to the problem not caused by item quality itself. Our office hours are MONDAY-FRIDAY 9:00PM-6:00PM PST, but we will response you once we get your message .There will be some delay on response if you send message or E-Mail on weekend. FAQ Q1: Will this bulb fit my vehicle? A: We can match almost any vehicle to one of our bulb sizes. Pricetronic only lets us include partial vehicle fitments per listing, but if your vehicle does not show up on the compatibility table at the top of our listings, welcome you to contact us for free consulation before purchasing a product. Q2: My item has not arrived, what's taking so long? A: Sometimes items take longer than expected, especially if it's going far or to rural area. Check with your post office to see if your item has been held up. Sometimes USPS will not update a tracking number until it has arrived at its destination. If your item still has not arrived after a few days, let us know so we can double check for you and help solve it asap. Q3: Do I need to mention the Year, Make and Model in the notes when place order? A: YES. Please include the Year, Make, and Model in the notes section during checkout to ensure you receive everything needed for your kit! Q4: My bulbs won't fit, help! A: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know. The bulb size may be wrong, double check the item you received with the item you ordered. Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications. Q5: Neither side lighting up? Both sides flicker, flash, or work inconsistantly. A:Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor. Q6: WARNING ABOUT POLARITY Unlike halogen bulbs, LEDs are polarity sensitive. BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket. -if your light turns on, please proceed to install both bulbs onto your vehicle. -if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle. Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different. All rights reserved. On Jul 31, 2023 at 22:00:01 PDT, seller added the following information:
Returns Accepted for this item if it's within 30 Days