6v LED Light Bulb for older Brake &Tail Lamp 6 Volt for Harley Davidson

1 new extra bright LED taillight / turn signal bulb for older cars, trucks, tractors, scooters, motorcycles, tractors, and more that use a 6-volt double contact DC bulb (dual function bulb) with stggered tabs for vintage motorcycles such asthe Harley Davidson bike. (please check your old bulb as some machines use a single contact and others use a double contact ). This bulb is 52mm tall from bottom contact to the top of the lens and slightly over 19mm wide. See the pictures in the ad (last 3) . It is brighter, lasts longer, and uses less (50,000 hours) watts (but is 10x brighter per watt). This bulb is polarity sensitive and will not work with a positive ground bike. This bulb will NOT work with an AC system . Will work with 6-volt DC, 9-Volt DC, 12-Volt DC, 18-Volt DC, 24-Volt DC, all the way to 32-Volt DC system. This bulb is custom made with a front projection lens, the beam angle is 360 degrees, it has a steel base and an alloy body. One of the brightest bulbs in its class; 500% brighter than a standard bulb! However, it is the front projections that makes it so effective. It's just a better engineered than other bulbs. This bulb is intended for a 6-volt DC system. It can function as low as 6-volts and as high as 32-volts DC. The voltage at the light socket, at full throttle, should not exceed 32-volts DC. If your machine has AC volts at the light socket this bulb will flicker and burn out in seconds. To get DC volts to your light socket you can wire the light socket directly to a battery with an on/off switch or add an in line voltage rectifier. If you need a different style bulb please send us a picture, or message us your make & year and we can look up your bulb. We are in Oklahoma City and have a 100% satisfaction  guarantee . To confirm our location please see our feedback. Please note: light bulbs are a part of an electrical system in a machine. For bulbs to function properly components such as electrical system, stator, voltage regulator, and light bulb sockets need to be fully functional. Common malfunctions are: Loose ground wire, bare positive wire causing a short, poor contact between the bulb and light socket, and malfunctioning voltage regulator which would cause very high voltage into the wiring harness and blowing bulbs instantly. Ships from a small business in Oklahoma, United States and we ship the same or next shipping day via USPS with free tracking. Buyer pays actual shipping cost. No overcharge. After the first set, all other sets ship at no additional cost. May work with other models as long as there's DC and not AC at the light socket

Returns Accepted for this item if it's within 30 Days